This page outlines the computing resources available for long-term visitors to the Simons Institute. If you need assistance or have any questions, please contact the Simons Institute system administrator by email (it-simons [at] berkeley [dot] edu), telephone (+1 510.664.4033), or in Calvin Lab, room 126.
Table of contents:
CalNet is the identity and access management system for UC Berkeley. Follow these steps to activate your CalNet ID:
- Go to https://calnet.berkeley.edu/activate/employee and enter your Affiliate or Employee ID number.
- Follow the steps to claim an account.
- For help, see detailed instructions on create your CalNet ID.
Use the CalNet Account Manager to manage your account, recover or reset your passphrase.
UC Berkeley email (bMail) accounts are required by some of Berkeley's online services. Use the links below to create and manage your account. Once your account has been created, you can forward it to your preferred email address.
Long-term visitors are advised to use AirBears2 or eduroam for unrestricted network access, including access to wireless printing in Calvin Lab. CalVisitor is limited to web browsing, VPN, and SSH.
Connecting to AirBears2 for the first time is a two step process. Step 1 is to create a key:
- Go to the Manage My Keys website and login using your CalNet ID and Passphrase
- Choose AirBears2
- Click Set Key.... A key will be generated for you
- Click Set Key... once more to save the key
- This key is your password for connecting to AirBears2
The eduroam network offers the same access to online services as Airbears2, however, authentication is managed by your home institution. Because of this, on-campus technical support is limited, and you'll need to seek support from your home institution for authentication issues.
See the campus Wi-Fi options page for more information and device specific instructions.
All of the offices in Calvin Lab have Ethernet ports for connecting to the campus network. To gain access, register your device for DHCP service using the NetReg website. The system administrator can loan you an Ethernet cable, or a network switch to make more ports available in a location.
Registering for DHCP service:
Printers for long-term visitors are located in the 2nd floor hallway, and on the 3rd floor in room 317. Wireless printing is only possible while connected to AirBears2, eduroam, or the EECS networks. There is a print kiosk (laptop) next to the 2nd floor printers that can be used for printing documents from email or a USB drive. All of the printers in Calvin Lab are capable of duplex printing; please utilize this feature to support the Institute's effort to minimize its environmental impact.
Printer setup instructions (Mac, Windows):
- Download and run the Xerox driver installer (Windows, Mac, Other)
- Enter the IP address of the printer (click on the network icon to display the IP address field)
- 22.214.171.124 (3rd floor room 317)
- 126.96.36.199 (2nd floor hallway #1)
- 188.8.131.52 (2nd floor hallway #2)
- If the printer model was not automatically detected, select Xerox Phaser 5550DN from the list
- Follow the prompts to complete the installation
Printing in Linux:
There is much variance between Linux distributions, so these are not complete instructions, but rather some tips to make printer setup easier.
- To access the CUPS printer management interface, point a web browser to http://localhost:631.
- In CUPS, when adding a printer, use the type AppSocket/HP JetDirect, and for the address use socket://<ip address> with one of the IP addresses listed above.
- If the Xerox drivers are installed on your system, use Xerox Phaser 5550DN Foomatic/Postscript (the model number doesn't have to match exactly, 5000DN, or even 3000DN should work).
- You can also use the Generic Postscript Foomatic/Postscript driver.
- Make sure to enable duplex printing.
Scanning and copying
The WorkCentre printer on the 2nd floor is capable of making photocopies, and scanning documents to a USB drive or email. Please note the following limitations:
- USB drives must be FAT32 formated
Program participants are automatically added to the following mailing lists:
- Visitors: For long-term visitors. This list is used by program organizers and participants to exchange information about the program and related events, as well as by Institute staff to send logistical updates.
- Announcements: For program participants and members of the general public who wish receive information related to the program. All messages sent to this list are moderated.
- Network: This is a social list for long-term visitors and their families.
To receive list emails in digest mode, send an email to sympa [at] lists [dot] simons [dot] berkeley [dot] edu (subject: SET%20list_alias%20DIGEST) with the subject
SET list_alias DIGEST, replacing
list_alias with the part of the list address before the @ symbol (e.g. complexity2015visitors).
Moderation and changing your subscription address
Messages sent to any list from an email address that is not subscribed to that list will be held for moderation. If you want to change your subscription address please email the doro [at] berkeley [dot] edu (Visitor Services Coordinator) with your request.
The AV/IT Specialist has a limited set of computing accessories available for loan by program participants, including:
- monitors and stands
- keyboards and mice
- display adapters
- power supplies
- presentation remotes
- network adapters
UC Berkeley has campus-wide licensing for several software products, some of which are available to visiting researchers. For information, visit https://software.berkeley.edu.
For more information about campus systems, or to find help when the System Administrator is away, see the following resources: